Busca Grab Grúa, Grúa Portátil , Pórtico Portátil en el directorio Industry, Reliable fabricante / proveedor / fábrica de China

Buzón de Consultas (0)
QZ 5T, 10T, 15T Modelo de grúa de palanca con doble viga y viga con motor
Home > Lista de Producto > Serie de grúas aéreas > Grab Grúa > QZ 5T, 10T, 15T Modelo de grúa de palanca con doble viga y viga con motor

QZ 5T, 10T, 15T Modelo de grúa de palanca con doble viga y viga con motor

Descripción del producto

QZ 5T,10T,15T Model Motor-driven Double Beam/Girder Grapple Crane

Brief Introduction

Type:  QZ 5T,10T,15T Model Motor-driven Double         Beam/Girder Grapple Crane  


Lifting capacity: 5t~20t


Span: 10.5~31.5m. Non-standard design can also

        be caught out according your requirement.


Structure: 
1. The bridge: traverses on the runway;
2. The crab: traverses on the bridge and lifts up and down;
3. The runway: tied to the building structure.

4. The grab: mounted with the crab.

Application
QZ 5T,10T,15T Model Motor-driven Double Beam/Girder Grapple Crane is widely used to transport, assemble, load and unload incompact goods in mine, port, factory, workshop, warehouses, and goods yard, etc. Grab's open direction is divided into parallel and vertical with main beam and the grab can be double or four wire rope, mechanical or electric hydraulic type according to different work duty and materials.
Product detail description
1.Strong beams. The crane beams are of welded construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and smaller wheel loads.
2.End carriage.  Crane travelling system, Motor-Reducer-Wheel driven system! motor used soft start motor which result in very stable starting!
3. Durable performance and High efficiency!
4. Modern cabin control with Air conditioner to separate operators from harsh environment
5.Electrical equipment: Electric systems are Siemens brand or Schneider brand!
6. Long service life with a low-maintenance!
Product show

Drawing
Safety features

1. Overload protection: If the materials or electric current overstep

the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If there's emergency situation, it could stop the

crane to protect operator and goods.
3. Control Method: Room control or remote control to avoid any

injure to the operation staff.
4. Main lifting motor: with thermal protection and currency protection.
5. Rubber buffers

Operation model
Ground handle; remote control; cabin (open and closed)
Load handling device
The crane can also be furnished with electromagnetic chuck according to the requirements of varied types of materials.
Motor
The travelling motor can be soft start motor and frequency adjustable-speed motor to start steadily and run safely.
Technological parameter

Lifting Capacity

T

5t

10t

16t

20t

Span

m

10.5-31.5m

Speed

Lifting

m/min

40.1

40.7

41.8